roduct Datasheet: UH-PVC Solvent Cement Reducing Tee
Product Overview
A Reducing Tee made from Unplasticized Polyvinyl Chloride (UH-PVC), designed for use in plumbing, drainage, and irrigation systems. This fitting is used to connect pipes of varying diameters, providing a smooth transition from a larger pipe to a smaller one. The solvent cement bond ensures a durable and leak-proof connection.
Material Properties
Material: Unplasticized Polyvinyl Chloride (UH-PVC)
Color: White / Grey
Temperature Range: Typically 0°C to 60°C (32°F to 140°F)
Pressure Rating: Up to 16 bar (depending on the size and application)
Corrosion Resistance: Highly resistant to chemicals, acids, and alkalis.
UV Resistance: Moderate (consideration for UV exposure in outdoor applications)
Key Features
Easy installation using solvent cement
Provides a leak-proof seal
Resists corrosion and chemical degradation
Compatible with standard PVC piping systems
Lightweight yet strong
Suitable for potable water, wastewater, and industrial applications
Technical Specifications
| Attribute | Value |
|---|---|
| Product Type | Reducing Tee |
| Material | UH-PVC |
| Nominal Diameter (A) | Various sizes available |
| Nominal Diameter (B) | Various sizes available |
| Pressure Rating | Up to 16 bar |
| Temperature Range | 0°C to 60°C |
| Standards Complied | ASTM D2466, ISO 727-2 |
| Joint Type | Solvent Cement Connection |
| Application | Plumbing, Irrigation, Industrial Systems |
Size Range
The Reducing Tee is available in the following sizes:
1/2" x 3/4"
3/4" x 1"
1" x 1-1/4"
1-1/4" x 1-1/2"
1-1/2" x 2"
2" x 2-1/2"
2-1/2" x 3"
3" x 4"
Installation Instructions
Preparation: Clean and deburr the pipe ends. Ensure the fitting and pipe are free of dirt and moisture.
Apply Solvent Cement: Using a brush, apply a layer of solvent cement to both the pipe and the inside of the fitting.
Assembly: Insert the pipe into the fitting, giving a slight twist to ensure proper contact.
Curing Time: Allow the assembly to cure for the recommended time before pressure testing or use. Typically, 24 hours at room temperature for full strength.
Certifications & Standards
ASTM D2466 – Standard Specification for Polyvinyl Chloride (PVC) Plastic Pipe Fittings
ISO 727-2 – PVC Pressure Fittings for Water Supply and Drainage Systems
NSF/ANSI 61 – Drinking Water System Components
Safety and Handling
Precautions: Wear gloves and safety glasses when handling solvent cement.
Storage: Store in a cool, dry place away from direct sunlight and sources of heat.
Disposal: Dispose of unused cement according to local environmental regulations.
Applications
Plumbing: Residential, commercial, and industrial piping systems
Irrigation: Agricultural and landscaping systems
Wastewater Management: Sewage and stormwater systems
Chemical Processing: For systems requiring corrosion-resistant fittings
